Evaluating the effects of splinting implant scan bodies intraorally on the trueness of complete arch digital scans: A clinical study.

STATEMENT OF PROBLEM: A predictable protocol for accurately scanning implants in a complete edentulous arch has not been established. PURPOSE: The purpose of this clinical study was to investigate the effect of splinting implant scan bodies intraorally on the accuracy and scan time for digital scans of edentulous arches. MATERIAL AND METHODS: This single center, nonrandomized, clinical trial included a total of 19 arches. Definitive casts with scan bodies were fabricated and scanned with a laboratory scanner as the reference (control) scan. Each participant received 2 intraoral scans, the first with unsplinted scan bodies and the second with resin-splinted scan bodies. The scan time was also recorded for each scan. To compare the accuracy of the scans, the standard tessellation language (STL) files of the 2 scans were superimposed on the control scan, and positional and angular deviations were analyzed by using a 3-dimensional (3D) metrology software program. The Mann-Whitney U test was used to compare the distance and angular deviations between the splinted group and the unsplinted group with the control. The ANOVA test was conducted to examine the effect of the scan technique on trueness (distance deviation and angular deviation) and scan time (α=.05 for all tests). RESULTS: Statistically significant differences were found in the overall 3D positional and angular deviations of the unsplinted and splinted digital scans when compared with the reference scans (P<.05). No statistically significant differences in overall 3-dimensional positional deviations (P=.644) and angular deviations (P=.665) were found between the splinted and unsplinted experimental groups. A faster scan time was found with the splinted group in the maxillary arch. CONCLUSIONS: Conventional complete arch implant impressions were more accurate than digital complete arch implant scans. Splinting implant scan bodies did not significantly affect the trueness of complete arch digital scans, but splinting appeared to reduce the scan time. However, fabricating the splint was not considered in the time measurement.

A novel digital workflow for fabricating artificial periodontal ligament using three-dimensional printing flexible resin: A dental technique.

The fabrication of periodontal ligament (PDL) models for in vitro dental studies has seen a wide range of techniques and materials being utilized. This paper introduces a novel dental technique that employs a digital workflow for the fabrication of artificial PDL using three-dimensional printing of flexible resin. This innovative approach offers several advantages, including enhanced accuracy and realism in simulating PDL. The digital workflow facilitates a streamlined fabrication process, ensuring efficiency and precision. By presenting this novel technique, this digital approach contributes to the advancement of in vitro dental research, providing researchers with a reliable and realistic model for studying various dental phenomena.

Effect of implant abutment screw materials and tightening protocols on reverse tightening values: An in vitro study.

STATEMENT OF PROBLEM: Implant abutment screw loosening is the most common prosthetic complication of implant-supported single crowns. However, few studies have objectively evaluated the effectiveness of different tightening protocols on reverse tightening values (RTVs). PURPOSE: The purpose of this in vitro study was to determine the optimal tightening protocol for implant abutment screws with different screw materials. MATERIAL AND METHODS: Sixty implants from 2 implant systems (Keystone and Nobel Biocare) with different definitive screw materials were selected. One group used diamond-like carbon (DLC) coated screws (DLC Group), and the other used titanium nitride (TiN) screws (TiN Group). Each group consisted of 30 implants. The implants in each group were distributed randomly into 3 subgroups (n=10). The implants from both manufacturers were mounted in resin blocks by following a clinical component connection protocol: a cover screw was placed, then an impression coping, and finally an original manufacturer prefabricated abutment. The abutment screws were tightened to the manufacturer's recommended tightening value using 3 different protocols: tighten the screw once (1T); tighten the abutment screw to the recommended tightening value, wait 10 minutes, and then retighten (2T); and tighten the abutment screw to the recommended tightening value, countertighten, tighten, countertighten, and then tighten (3TC). RTVs were measured after 3 hours. The Shapiro-Wilk test was performed to test for normal distribution of the data. The Kruskal-Wallis test was applied to each system's group that was not normally distributed (P<.05). Where differences existed, a post hoc analysis using the Dwass-Steel-Critchlow-Flinger (DSCF) pairwise comparisons test was conducted. RESULTS: No significant differences were found among the 3 different tightening groups in the TiN group (P>.05). However, significant differences were found among the 3 different tightening protocols in the DLC group (P<.05). CONCLUSIONS: Abutment screw systems from different manufacturers behave differently with respect to how they are tightened. For the TiN screw group, statistically similar RTVs were found for the 3 tightening protocols. The most efficient tightening protocol for the DLC-coated screw was the 3TC-DLC.

Digital workflow for duplication of gold onlay anatomy to monolithic zirconia onlay for a complete denture: A technique paper.

Digital replication of an existing cast gold onlay anatomy to a more esthetic material for a new complete denture is challenging. A technique is presented that uses digital technology to fabricate a new maxillary complete denture with monolithic zirconia onlays that duplicate the anatomy of an existing complete denture with cast gold onlays.

Digital beading for a CAD-CAM framework for an implant-supported overdenture: A dental technique.

The analog technique of making bead lines for a metal superstructure framework for the maxillary implant-supported overdenture is created by scribing shallow grooves on the surface of a definitive gypsum cast. This report describes a digital technique that uses computer-aided design and computer-aided manufacturing technology to make dental bead lines on an intraoral impression without using the gypsum cast.

Classification of maxillectomy in edentulous arch defects, algorithm, concept, and proposal classifications: A review.

OBJECTIVES: Aramany's classification of postsurgical maxillectomy defects was introduced for partially edentulous situations, and has been widely used for education and effective communication among practitioners. Numerous classifications of maxillofacial defects, based on surgical procedure, resultant defects, or prosthodontist's perspective after rehabilitation, exist in the literature. However, no single classification has incorporated all these factors. The purpose of this review was to highlight the classification systems and describe a pragmatic classification series for edentulous maxillary arch defects (maxillectomy) by applying the Aramany classification criteria, to enhance treatment outcomes and communication among practitioners. MATERIAL AND METHODS: An electronic search of the literature published in English was conducted using the PubMed/MEDLINE and Google Scholar database. Keywords used were "maxillectomy classification" AND "surgical resection," "maxillectomy classification" AND "complete edentulous." In addition, a manual search was also performed followed the same criteria in the following journals: Journal of Prosthetic Dentistry and Journal of Prosthodontics. RESULTS: Several classification systems for partial dentition were found in terms of size, location, dentition, and extension of the defect (isolated or communication defects). The findings revealed a variety of maxillectomy defect classifications for partially dentate, considering surgical factors and rehabilitation. However, no study or classification system exist for the edentulous arch defects. CONCLUSIONS: Different classification systems for maxillectomy defects exist in the literature, only for partially dentate patients. To the authors best knowledge, no classification system for completely edentulous maxillary arch defects have been proposed till date. A simple classification system with clear characteristics for edentulous maxillectomy dental arch defects has been proposed. This classification was modeled after Aramany classification for easier memorization and application.

Complications Associated with Metal Resin Fixed Complete Dentures Based on Implant Distribution.

PURPOSE: To compare prevalence and type of complications associated with metal resin fixed complete dentures based on implant distribution. MATERIALS AND METHODS: This retrospective study included data collected for a period of 12 years for patients treated with maxillary and mandibular implant-supported fixed complete dentures at Loma Linda University School of Dentistry. In total, 223 patient's charts were reviewed which included 100 maxillary and 123 mandibular fixed complete dentures. Implant distribution and prevalence of complications associated with each implant-supported fixed complete denture were documented. Tooth delamination, the most common complication associated with fixed complete dentures, was compared between 2 implant distribution groups in each arch. Covariates including age, sex, opposing arch, cantilever occluding units, and number of implants were evaluated to determine their association with tooth delamination. Data and hypotheses were statistically analyzed using descriptive statistics along with logistic regression model. All tests of hypotheses were considered statistically significant at an alpha level of 0.05. RESULTS: In the maxillary arch, some effect of the prevalence of tooth delamination was seen for the group that had implants placed posterior to canine eminence but it was not statistically significant. Denture tooth delamination had the highest prevalence among complications irrespective of implant distribution. Significant denture tooth delamination was seen for patients with opposing fixed complete dentures in comparison to patients with removable opposing arch prostheses. CONCLUSIONS: Implant distribution is not a significant factor related to metal resin fixed complete dentures. Opposing fixed complete dentures have a significantly higher association with denture tooth delamination.

Evaluating the effect of the protector cap for castable implant abutments on reverse tightening values.

STATEMENT OF PROBLEM: Screw loosening is the most common mechanical complication with implant prostheses. How the alteration of implant-to-abutment connection surfaces that occurs during laboratory procedures affects screw loosening is unclear. PURPOSE: The purpose of this in vitro study was to compare the reverse tightening value (RTV) differences between custom castable abutments before casting, after casting in a conventional manner, and after casting with custom protector caps and pegs. MATERIAL AND METHODS: Thirty implants with a standard-diameter conical connection (NobelReplace Conical Connection 4.3×13 mm; Nobel Biocare AG) and 30 premachined 4.3-mm GoldAdapt abutments (GoldAdapt; Nobel Biocare AG) were selected for this study. Specimens were divided into 3 groups (n=10): the uncast custom castable abutment group (UCCA) in which abutments were new and not cast; the unprotected custom castable abutment group (UPCCA) in which abutments were cast and devested with airborne-particle abrasion; and the protected custom castable abutment group (PCCA) in which abutments were cast by using protector caps and pegs made by milling zirconia and then devested with airborne-particle abrasion. All abutments in each group were tightened to 35 Ncm with a calibrated digital tightening device. After 10 minutes, all screws were retightened to 35 Ncm. At 3 hours, each screw was loosened, and the value at which the initial loosening occurred was documented as the RTV. The results were statistically analyzed with 1-way ANOVA to explore differences, and post hoc tests with Tukey adjustment were used for multiple comparisons. RESULTS: Among the tested groups, the mean RTV ranged from 19.89 Ncm to 27.19 Ncm: UCCA 27.19 Ncm, UPCCA 19.89 Ncm, and PCCA 24.24 Ncm. A significant difference was found among the tested groups (P<.05). CONCLUSIONS: Casting procedures, especially devestment with airborne-particle abrasion, affected implant-abutment connections and the seat site of the screw. Protecting the implant connection site and the seat site of the abutment screw with protector caps and pegs prevented a significant loss of the RTV.

Scanning accuracy with splinted and unsplinted implant scan bodies for the edentulous arch at implant level: an in vitro study.

Accuracy of completely edentulous arch scanning with implant scan bodies has not been completely validated for intraoral scanners. For desktop laboratory scanners validations were found in the literature. The aim of this in vitro study was to compare the dimensional accuracy of scanning with splinted and unsplinted scan bodies on a completely edentulous maxillary arch with 6 implants. A maxillary edentulous master cast with 6 implants was used as control for all implant level impressions. 6 implants were digitally planned and placed at different angulation of 0, 0  17° and 30°. A contact coordinate measuring machine (CMM) was used to generate baseline linear measurements of the master cast. Four test groups included: 2 intraoral scanners Trios (3shape, Copenhagen, Denmark) and True Definition (3M ESPE, St Paul, MN), one industrial scanner Atos (Core optical 3D scanner) and one conventional impression group scanned with laboratory scanner Dental Wings 7 Series. Each scan recording was made with splinted and unsplinted scan bodies. Digital datasets of all measurements were compared with the CMM baseline values using PolyWorks® InnovMetric Software in order to assess the linear and angular deviations and determine the accuracy of complete arch digital impression. Factorial ANOVA showed significant effect with splinting, scanner type, inter-implant distance and implant angulation for linear deviations. Splinted scan bodies revealed elevated linear and angular deviation values for all scanners with significantly highest deviations for True Definition scanner. Significant correlation was found between inter-implant distance and linear deviation (r =0.45, P =<0.001) with increased linear deviations among all scanners, regardless of splinting. ( P <0.05). Significant effect on accuracy was seen for angular deviation with splinting, scanner type and implant angulation; significant difference was found between 0° and 30° implant angulation ( P =0.035) with more deviation with 30° implant angulation. The accuracy of the complete arch implant digital impression using splinted scan bodies was significantly reduced for measurements that crossed the arch midline. The digital impression technique using a broad splint design to connect scan bodies was not found to improve the scan accuracy for intraoral scanners.

Survey of Dental Clinicians for Attitude and Use of Torque-Limiting Devices.

PURPOSE: The purpose of this study was to survey practicing clinicians and determine if differences existed concerning their use of torque-limiting devices (TLDs) and screw-tightening protocols, comparing this with existing universal industry standards. MATERIALS AND METHODS: A nine-question survey was administered with 428 dentists providing data for three specific areas: (1) demographic information-TLD ownership, device age, frequency of use, and observations of screw loosening; (2) recognition information-calibration, reading measurements of the TLD, and the meaning of preload; (3) usage information-screw-tightening protocols and effect of speed during actioning of the TLD. Data collection was compared with industry standards for use of hand torque tools including ISO-6789 1,2:2017 and related texts pertaining to screw fastener protocols. RESULTS: The beam-type TLD was the most popular; however, 33% surveyed used it incorrectly. Most TLDs being used were older than 1 year, with only 6% calibrated. Forty-eight percent observed screw loosening less than once per year, while 44% reported three or more occurrences per year. A similar number used the TLD for implant placement and abutment screw tightening. Screw-tightening protocols varied. Preload was not understood by the majority of those surveyed. CONCLUSION: Dentistry does not appear to adhere to the protocols and standards recommended by other industries that also rely on screw-fastening mechanisms and TLDs. Further education and training appears to be warranted in this area of implant dentistry to reduce the risks of screw-associated complications.

What Materials and Reproducible Techniques May Be Used in Recording Centric Relation? Best Evidence Consensus Statement.

PURPOSE: The purpose of this Best Evidence Consensus Statement was to evaluate the existing literature relative to two focus questions: What are the techniques used and their reproducibility in recording centric relation (CR) in a dentate and partially dentate population and what effect do different recording materials have on the reproducibility of CR? MATERIALS AND METHODS: Keywords used in the initial search were: CR, interocclusal records, CR accuracy, CR reproducibility, and CR technique. The search was then limited to Systematic Reviews, Randomized Controlled Studies, Meta-analyses, and Clinical Trials. RESULTS: Initial search related to the selected search terms resulted in more than 3500 articles. When subsequent search was limited to Systematic Reviews, Randomized Controlled Studies, and Meta-Analysis and Clinical Trials, this resulted in 291 articles selected for further analysis. CONCLUSIONS: Techniques using chin point guidance, bimanual manipulation, power centric, Gothic arch tracing, leaf gauge, and anterior deprogramming devices to record CR can all be comparable in precision and clinical accuracy in regards to clinical relevance. Practitioner experience and familiarity with a particular technique is critical for accuracy when recording CR. Polyvinyl siloxane and polyether consistently performed better in the broad range of studies on recording materials. Virtual capture of CR could serve as a comparable recording medium but requires further clinical study.

The Relationship Between Centric Occlusion and The Maximal Intercuspal Position and Their Use as Treatment Positions for Complete Mouth Rehabilitation: Best Evidence Consensus Statement.

PURPOSE: The purpose of this Best Evidence Consensus Statement was to evaluate the existing literature relative to two focus questions: How often does centric occlusion coincide with maximal intercuspal position in dentate and partially dentate populations?; and should centric occlusion or maximal intercuspal positions be equivalent for dentate and partially dentate patients undergoing complete mouth rehabilitation? MATERIALS AND METHODS: Keywords used in the initial search were: intercuspal position, centric occlusion, centric relation, maximal intercuspal position, prosthodontic rehabilitation, and occlusion. The search was then limited to Systematic Reviews, Randomized Controlled Studies, Meta-analyses and Clinical Trials. RESULTS: The initial search strategy related to the selected search terms resulted in more than 15,000 articles. When the subsequent search was limited to Systematic Reviews, Randomized Controlled Studies, and Meta-Analysis and Clinical Trials, 313 articles were selected for further analysis. CONCLUSIONS: Review of the literature reveals that most dentate and partially dentate patients do not have coincident centric occlusion and maximal intercuspal position. There is support for coincidence between centric occlusion and maximal intercuspal position as the preferred occlusal relationship in complete mouth rehabilitations. The literature does not report conclusive evidence of adverse prosthodontic outcomes with complete rehabilitations in centric occlusion or maximal intercuspal position in a healthy population. However, there is support for an association between centric occlusion-maximal intercuspal position discrepancies and occlusal instability as well as temporomandibular joint disorders. Hence, it is concluded that partially and completely dentate patients requiring complete mouth rehabilitation should be restored in centric occlusion.

Integration of intraoral scanning and conventional processing to fabricate a definitive obturator: A dental technique.

Clinical challenges occur when treating patients with maxillofacial defects with digital technology. This report describes a technique that combines intraoral scanning to fabricate a milled record base along with the conventional processing to fabricate a definitive maxillary obturator prosthesis.

Leadership diversity in prosthodontics: Number of women and nonwhite individuals serving as President of selected prosthodontic organizations in the last 20 years.

STATEMENT OF PROBLEM: As a measure of the leadership diversity in prosthodontics, the number and percentage of women and nonwhite Presidents of prosthodontics organizations is unknown. PURPOSE: The purpose of this observational study was to calculate and compare the number and percentage of women and nonwhite Presidents of 10 selected prosthodontic organizations over the past 20 years and to determine whether the number of women and nonwhite Presidents has changed over the time frame of 2000-2019 in comparison to male and white Presidents. MATERIAL AND METHODS: The number of women and nonwhite Presidents of the Academy of Prosthodontics (AP), American Academy of Fixed Prosthodontics (AAFP), American Academy of Maxillofacial Prosthetics (AAMP), American College of Prosthodontists (ACP), American Prosthodontic Society (APS), European Prosthodontic Association (EPA), International Association of Dental Research - Prosthodontics group (IADR-P), International College of Prosthodontists (ICP), Greater New York Academy of Prosthodontics (GNYAP), and Pacific Coast Society for Prosthodontics (PCSP) was recorded. The chi-square test was used to determine differences in the percentage of women and nonwhite Presidents over time and between organizations. RESULTS: The range of women Presidents in the selected years was 20% (EPA) to 0% (APS) with a mean of 10%. No statistically significant differences over time and between organizations were observed. The range of nonwhite Presidents in the selected years was 25% (ICP) to 0% (AAFP, AAMP, ACP, and GNYAP) with a mean of 7.5%. No statistically significant difference over time was observed while a statistically significant difference between organizations was observed (P=.015). Multiple comparisons revealed the ICP had significantly more nonwhite Presidents in the selected years. CONCLUSIONS: The relatively low numbers of women and nonwhite Presidents in the organizations studied is compelling evidence that there are an insufficient number of women and nonwhite role models in prosthodontics and that important voices representing the diversity of members of the prosthodontic community remain unheard.

Evaluation of implant abutment screw tightening protocols on reverse tightening values: An in vitro study.

STATEMENT OF PROBLEM: Implant abutment screw loosening is a common prosthetic complication of implant-supported crowns. However, reports that have objectively evaluated the effectiveness of different tightening protocols on reverse tightening values are sparse. PURPOSE: The purpose of this in vitro study was to determine the optimal tightening protocol for implant abutment screws. MATERIAL AND METHODS: Fifty Neoss implants were randomly distributed to 5 groups (n=10). The implants received a cover screw and mounted, and the impression coping was tightened. Tightening was measured by using a digital measuring device. Then, the implant abutments were placed and tightened to 32 Ncm by using a Crystaloc screw. In Group 2T10I, the screws were tightened twice with an interval of 10 minutes between the first and second tightening. In Group 2T0I, the screws were tightened twice with no interval time. In Group 1T, the screws were tightened 1 time only. In Group TCT, the screws were tightened, counter-tightened, and then tightened again. In Group TCTCT, the abutment screws were tightened, counter-tightened, tightened, counter-tightened, and then tightened again. All the mounted implants were left in the same environment for 3 hours, and the reverse tightening values were then measured. RESULTS: The mean reverse tightening values of the first 4 groups ranged from 21.49 Ncm to 22.57 Ncm, whereas the reverse tightening value for the fifth group was 25.51 Ncm. A significant difference was found among the groups (P<.05) with reverse tightening data. CONCLUSIONS: No significant difference was found in tightening the abutment screw 2 times with a 10-minute interval time, no interval time, or tightening it 1 time only. However, a significant difference was found in reverse tightening in the 3-time tightening and counter-tightening group.

Abutment screw torque changes with straight and angled screw-access channels.

STATEMENT OF PROBLEM: Angle-correcting options allow the use of screw-retained implant prostheses in situations where an implant has been placed with a facial inclination. However, manufacturers have different recommended torque values, and it is unclear whether the performance of these designs is equivalent to that of the traditional screw-retained crowns (SRCs) when subjected to cyclic loading forces. PURPOSE: The purpose of this in vitro study was to compare torque differences between conventional straight-line screw access and angulated access SRCs before and after simulated functional loading. MATERIAL AND METHODS: Five groups consisting of 10 SRCs and implants were formed: Nobel Biocare zirconia crowns with 20-degree access channels (NB-20); Dynamic Abutment Solution zirconia crowns (DA-20) with 20-degree access channels; Core3dcentre angle correction zirconia crowns with 20-degree access channels (C3D-20); Nobel Biocare zirconia crowns with 0-degree access channels (NB-0); and gold alloy crowns cast to Nobel Biocare Gold-Adapt abutments (GA-0). Each specimen underwent thermocycling before cyclic loading. A preload torque based on the manufacturer's recommendation was applied to each crown placed on an implant. Reverse torque measurements were obtained for each specimen before cyclic loading. Each implant-abutment assembly was then cyclic loaded at 0 to 100 N at 10 Hz for 1 million cycles. Reverse torque measurements were obtained after cyclic loading and the percentage difference calculated. RESULTS: No significant percentage torque loss differences were observed between the 0-degree and 20-degree SRCs after cyclic loading. No significant differences were seen among the angulated access channel crowns. DA-20 and C3D-20 specimens had significantly higher torque loss compared with the NB-0 group. The C3D-20 group reported the largest percentage torque loss (34.5%) among the angulated access screw channel groups. The GA-0 group reported the largest percentage torque loss of all the groups (35.9%). No crown mobility or other complications were observed in any of the groups after cyclic loading. CONCLUSIONS: Angulated access channel crowns performed comparably with conventional straight-line screw access SRCs with regard to percentage torque values after cyclic loading. Angulated access channel crowns with lower manufacturer recommended torque values had higher percentage torque differences.

Influence of Tooth Preparation Design and Scan Angulations on the Accuracy of Two Intraoral Digital Scanners: An in Vitro Study Based on 3-Dimensional Comparisons.

PURPOSE: To evaluate the accuracy of two intraoral scanners (IOS) in terms of different preparation designs and scan angulation limitation due to the presence of adjacent teeth. MATERIALS AND METHODS: Eight different complete coverage (CC) and partial coverage (PC) tooth preparations were scanned by two IOS, the 3Shape TRIOS (TRI) and the 3M True Definition (TRU). All teeth preparations were scanned in the presence and absence of adjacent teeth. Four groups were established for each IOS; Group 1: PC preparations with adjacent teeth. Group 2: CC preparations with adjacent teeth. Group 3: PC preparations without adjacent teeth. Group 4: CC preparations without adjacent teeth. 3D analysis was performed to examine average absolute discrepancy (AAD) and maximum absolute discrepancy (MAD). A Two-way ANOVA was performed followed by a post-hoc Tukey's test HSD to evaluate the effect of adjacent teeth, preparation design, and the type of IOS used. RESULTS: For TRI, AAD for groups 1, 2, 3, and 4 were 20 ± 1.8 µm, 19.6 ± 2.4 µm, 15.5 ± 2.7 µm, and 12.9 ± 1.4 µm, respectively, whereas MAD for groups 1, 2, 3, and 4 were 109.7 ± 13.5 µm, 93.2 ± 28.9 µm, 85.6 ± 16.1 µm, and 66 ± 20.1 µm, respectively. For TRU IOS, AAD for groups 1, 2, 3, and 4 were 22.0 ± 3.6 µm, 17.9 ± 2 µm, 20 ± 5.9 µm, and 14.9 ± 1.7 µm, respectively, whereas the MAD for groups 1, 2, 3, and 4 were 151.4 ± 38.4 µm, 92.2 ± 17. µm, 92.6 ± 23.6 µm, and 71.4 ± 11.9 µm, respectively. Two-way ANOVA showed statistically significant differences between the AAD and MAD of TRI and TRU (p < 0.001). There were also statistically significant differences for presence or absence of adjacent teeth (p < 0.001), and preparation design (p < 0.001). CONCLUSIONS: PC preparation scans revealed lower accuracy than CC. The presence of adjacent teeth decreased the accuracy of both IOS. TRI gave higher accuracy than TRU for PC, but both IOS showed comparable accuracy for CC groups.

An in vitro investigation comparing methods of minimizing excess luting agent for cement-retained implant-supported fixed partial dentures.

STATEMENT OF PROBLEM: The use of cement-retained implant-supported prostheses is a well-established treatment option. Techniques have been proposed to reduce the amount of residual excess cement (REC) around cement-retained single-implant restorations. However, studies evaluating the effectiveness of such techniques related to cement-retained implant-supported fixed partial dentures (CRISFPDs) are lacking. PURPOSE: The purpose of this in vitro study was to evaluate the effectiveness of various cement application techniques for CRISFPDs. MATERIAL AND METHODS: Two implant analogs were placed in the lateral incisor sites in a maxillary, 3D printed cast with 4 missing incisors. Twenty standardized, removable, printed soft-tissue replicas, 40 milled titanium custom abutments, and 20 milled zirconia CRISFPDs were fabricated. Two cement application techniques, the brush on technique (BOT), and the polyvinyl siloxane index (PI) technique were compared. Two cementation techniques, without bib (control) (n=10) and with a polytetrafluoroethylene (PTFE) bib (test) (n=10), were used. A premeasured amount of interim cement was used to cement the CRISFPDs. The CRISFPDs were retrieved after cementation, and standardized photographs of 4 quadrants of each abutment-CRISFPD assembly were made by using a software program that is used to calculate the ratio between the area covered with REC and the total specimen area. The extension of the REC on both the abutment and soft-tissue replica was measured at sites before and after cleaning the REC. A generalized linear mixed-model procedure was used for statistical analysis (α=.05). RESULTS: For cement application, the polyvinyl siloxane (PVS) index technique had significantly less REC than the brush on technique (P<.05). The use of a PTFE bib led to significantly less REC than when no bib was used (P<.05). CONCLUSIONS: The use of the PVS index technique along with a PTFE bib was effective in reducing REC for CRISFPDs.